As well as the use of bio based plastics we recently carried out our first test of combining our printed structures Eco concrete. This was the first in a series that we will carry out in order to increase the structural strength of our printed pieces.
The concrete casting has a two fold function; firstly to increase the compressive structural capacities of the printed pieces, secondly it will also act as a connecting material to join seperate pieces together via the inclined shafts that we have developed.
With a demonstration from Henkel, we were able to experience the process first hand, seeing what proportions and how the different elements were mixed together and applied. The concrete mix includes lightweight aggregates in an attempt to keep the weight and material consumption to a minimum.
The special concrete mix is variable giving the potential to alter parameters such as curing time, additional insulative material and colour. In this particular test it was cast just after lunch time and it was solid enough to stand on before the end of the day!
Material, construction and design parameters are all closely connected in the design & build process of the 3D Print Canal House.
The 3D print material for the house is developed by material partner Henkel. Aim is to develop a renewable, sustainable, strong, tactile and beautiful material that can compete with current building techniques.
At this moment we're testing with different material samples to develop the optimal print-material. Base for the current tests is hotmelt (80% bio-based).
Today we started printing a 6m tall wall. The wall has shafts of different dimensions. The larger structural shaft run towards the locations where adjacent rooms need support. These shafts will be cast with Henkel's Eco-concrete, and will so create a the structural framework of the house.
Both sides of the wall have a different set of shafts. On one side the shafts have a slight inclination from bottom-right to upper-left, while on the other side of the wall the shafts run in the opposite direction. This way the to sides together create structural crosses.
All parameters we work with are scripted. This allowed us to change the dimensions of the structural shafts during the design process to match the structural demands from our structural engineer partner Tentech, without redrawing the complex design over and over.
3D-printing and scripting are perfect partners in terms of flexibility. While scripting allows us to create designs that can easily be adapted to changing circumstances of all kinds, the printer doesn't bother if it prints a series of similar copies, or an awesome series of unique pieces.
The last few weeks we have been experimenting with inclined shafts. The new house-pieces we print contain a double layer of shafts, one side running in one direction, the other side in the other direction. The script we developed for these designs allows us to change the shaft dimensions and the angle of the shafts.
The coming weeks we are taking this a few steps further by adding parameters to the script. We will update you soon!
The 3D Print Canal House is printed with the KamerMaker. KamerMaker means ‘RoomBuilder’ and that instantly gives away how the 3D Print Canal House will be build. The house design consists of several room types, which are assemled digtially and converted into onse strucutral design
Each room is printed separately on site before being assembled into one house. This way the rooms can be carefully tested in a safe and easy accessible manner. Each room is different and consists of complex and tailormade architecture and unique design features. The structure is scripted and this creates its proper strength but also generates ornament, and allows for new types of smart features, such as angled shading scripted to the exact solar angle. Each printed room consists of several parts, which are joined together as large Lego-like blocks. Both the outside façade as the interior are printed at once, in one element. Within the 3D printed walls are spares for connecting construction, cables, pipes, communication technique, wiring etc.
The rooms themselves are entirely structurally sound. In the second phase of the project, the separate rooms are assembled into connected floors, and then stacked into the entire house. Added advantage is that the rooms can fairly easy be disconnected in case the house needs to be relocated.
The main facade of the 3D Print Canal House has an extra special character as it showcases how the 3D-print technique develops. The ground floor has modest ornament: As the 3D printtechnique develops and the number of building elements grows also the level of experiment in ornament rises, which is expressed in the most richly decorated part of the façade: The stepgable.
The structural aspects are tested both digitally and on site in collaboration with the structural engineers of Tentech. The construction is based on a structural extruded printed grid that can take several shapes. Folds in the structure generate strenght, so the level of ornaments enhances the construction. Each printed element consists of numerous diagonal hollow collumns.When the elements are mounted together the hollow collumns create large structural crosses that support the entire structure.
Heijmans is building partner of the project and takes charge in the building of the house, and the developing of new means of connecting the separate elements into a safe ans solid house.
The 3D Print Canal House is an exhibition, research- and building site for 3D Printing Architecture.
The 3D Print Canal House is an exhibition, research- and building site for 3D Printing Architecture. A unique project where an international team of partners collaborates in ‘research & doing’ linking science, design, construction and community, by 3D printing a canal house at an expo-site in the very heart of Amsterdam.
1. Why 3D Printing?
3D printing is a fascinating new production technique. It allows you to directly translate a digital file into a physical product. 3D printing can have huge implications for the way we fabricate things - for example the elimination of waste, transport costs and standardisation of elements - DUS architects is investigating what the implications of 3D printing are for the building industry. What better way to do this than by 3D printing an entire house?
2. Why a canal house?
The canal house is a symbol of Amsterdam. When the canal belt was built 400 years ago, Amsterdam was a prime example of innovation. Each canal house can house several functions, such as trade, storage, living, craft, and each canal house is richly ornamented and unique. A canal house is recognizable and attractive. It is interesting to investigate what this traditional architype can be in a 21st century context. 3D printing a canal house shows the world how to combine traditional local values with new innovative ideas.
3. What are some of the advantages and disadvantages of 3D printing a building?
One great advantage of 3D printing over traditional buidling techniques (such as prefabricated concrete) is the possibilities of using a high level of detail and ornament and variation. Rather than using standardized elements, 3D printed designs can each be modified and customized to fit the user's needs and taste. It will no longer be more expensive or more labour intensive to add details to for example your façade and it is easy to create unique objects.
3D printing is an additive manufacturing technique. That means the process goes straight from the raw material to the final product, thus eliminating waste. There are no transport costs, as designs can simply be transferred digitally and printed locally. This also implies that when 3D printing is used widely in each part of the world, it will no longer be cheaper to have things produced in countries like China or Bangladesh as opposed to the Netherlands. Everyone can just produce everything in their own local context.
In terms of disadvantages, it is obviously a huge challenge to create a building that complies with all the current building regulations. There is the question of insulation, fireproofing, wind loads, foundations...these, as well as the possible materials to print with (using this printer) are all things that are being researched and investigated.
4. How does the Kamermaker work?
The Kamermaker works in exactly the same way as the Ultimaker, the small desktop 3D printer, as it is simply an upscaled version. A digital design is placed in the 'brain' of the printer, a very simple computer, where it is translated into a G-code. A G-code is a file that slices a 3D model into layers. This file programs the printer to move along a path that is optimal for that design, layer by layer.
In the 'control room' of the printer is also the material supply. We print with plastic in the form of granulate which enters an extruder via a funnel. In the extruder the granulate is heated (the material melts at 170 degrees Celsius) and pressed together to a homogeneous liquid. This is brought to the printer head by a heated tube. The printer head extrudes the melted material along the programmed path on the X and Y axes and when finished moves up one step along the Z axis. This is fairly similar to a normal printer, only with one more direction, which allows objects to be printed layer by layer.
5. What materials does the Kamermaker print with?
We are currently printing with bioplastics. The granulate that goes into the Kamermaker is called Macromelt, a type of industrial glue (Hotmelt) developed by Henkel. It is made of 80% of vegetable oil. It melts at 170 degrees Celsius. We aim to print with a material that is sustainable, of biological origin, melts at a relatively low temperature, and of course is sturdy and stable. We are also researching the possibilities of printing with recycled materials: Plastics of course, but we’re also looking into using wood pallets and natural stone waste.
Technically, the Kamermaker can print with any material that melts (at a temperature that isn't too high) and then hardens again.
7. Who are the initiators and partners?
DUS architects is the initiator of both de KamerMaker and the 3D Print Canal House. DUS architects is an Amsterdam based architecture office founded in 2004 by Hans Vermeulen, Hedwig Heinsman and Martine de Wit. DUS architcts builds ‘public architecture’: Architecture that influences the public domain using scale 1:1 models, urban process- and strategy design, and that ranges from temporary interiors to long-term urban transformation trajectories. www.dusarchitects.com
DUS architects is collaborating with lots of important partners who invest in the project with knowledge and means. For example:
Henkel is developing a new sustainable 3D print material for the building industries.
Heijmans is researching what new construction techniques are needed for 3D printing buildings.
The Municipality of Amsterdam investigates the effect of the digital maker-industries on regulations and opportunities for employment.
Check the 'partners' section at this website for an actual overview of all our courageous partners!
8. How is the house financed?
The project is partially funded by the contributions of our partners and partially funded by the municipality of Amsterdam, Amsterdam Fund for the Arts and the DOEN Foundation. A lot of the sponsorship the 3D Print Canal House gets is in natura, through contributing knowledge or materials. In fact, the 3D Print Canal House is one big collaboration project, in which everybody shares and gets a share.
And of course our visitors help finance the house by paying an entrance fee!
9. How much does the house cost?
That is impossible to say since all of the materials we use have never been on the market for this purpose. The 3D Print Canal House is a research project partially funded and partially created by DUS architects and its partners. At the end of the research trajectory, we hope to be able to give an accurate estimate of what it takes to 3D print a house. The goal is to create a cost-effective building technique for building sustainable and comfortable houses.
10. What is there to do at the 3D print canal house?
The construction site of the 3D print canal house not just a building site, it is an open workplace where an international team of partners collaborates in 'research and doing (R&DO), as well as an open source expo. You can visit it like a regular museum to learn more about the techniques being researched and used, and you can watch the team at work! We have an audiotour to explain you everything you see.
The building is constantly under construction: in three years time more and more rooms will be printed and assembled on site as the design and printing techniques progresses. So evry week this museum changes!
Also there are regular workshops and events held at the expo (watch our calendar). If you wish to book a personalised tour, attend a workshop or lecture, or rent out the expo for a special event, please contact email@example.com
11. Why do I need to pay an entrance fee?
When you visit the 3d Print Canal House, you are not just visiting a building site, you are visiting an open research workplace and exhibition. By paying €2,50 entrance fee, we can create an informative and secure tour for visitors without being of to much disturbance for the research and work progress. With the fee you pay, you are directly funding the development of the project. Don't worry, you'll be getting value for your money, such as a free audiotour.
12. How can I contribute?
The 3D Print Canal House is an open project. That means that we are learning from our audience during the project. We are always happy to hear about your ideas.
You can contribute by sharing your knowledge or simply by visiting and paying entrance fee or booking a group tour.
If you wish to make further contributions, find out how by clicking on 'Become a Friend!'
13. When will the house be finished?
The 3D Print Canal House is a 3 year research and development project. This does not mean that the expected time it will take to 3D print a building in the future will be 3 years. On the contrary: The aim for the use of 3D printing in architecture is to build faster compared to traditional building techniques. Within the 3 years research project of the 3D print Canal House, DUS architects is building the Canal House and by doing so building up new knowledge for this purpose and sharing this with the community through the website and expo center.
14. What will happen to the building after it's finished?
Most likely it will be a public building. We hope that the 3D Print Canal House will become a hub for innovation and new production techniques and materials for the building industry. And of course that many more 3D printed buildings will pop up around the globe!
15. What sets this print project apart from other large scale 3D print initiatives?
Currently, 3D printing is on the rise, and there are many other initiatives, both on a large and small scale (also see 'other 3D printing initiatives' for a bit more in depth overview) going on that we can hardly keep track.
What makes the 3D Print Canal House special is that it is a project which is 'open' in every way: The initiators, designers and builders (DUS architects) are the client: the focus is on research, experimentation and development, instead of finishing a house. The project involves many different industries, disciplines and parties tied together by a common goal. More importantly, the process is being shown to the public (not only the successes but also the possible failures it will encounter!) in order to learn and develop.
16. What are some other interesting 3D printing initiatives?
3D printing is already widely used in many industries, particularly when on a small scale a high level of unique detail is required (big chances are that if you need a crown or hearing aid, it will be 3D printed). It is a production technique that is becoming more and more widely available. The great thing is that 3D printing can easily create objects or parts of objects that are custom fit and have a high level of detail and variety.
The 3D Print Canal House is a pioneering example and the first house that is being printed on the spot with the largest portable 3D printer. However, there are quite a few other initiatives on a similar large scale around right now, and chances are there will be more and more over the next months and years.
Some interesting examples to look at are:
Examples of using ‘our’ FDM printing technique combined with a concrete like material are Contour Crafting in California and Shanghai WinSun Decoration Design Engineering Co.
A different technique is developed by Enrico DinI in Italy using first a layer of sand and immediately after a layer of binder (glue) - turning the sand into a solid concrete like object. This printer is also used for Universe Architecture's Landscape House.
Dirk van der Kooij in Zaandam produces interior objects like chairs and vases with a FDM like printing technique using recycled plastics.
On a smaller scale 3D printing is used in the medical industry, machinery, prototyping, jewerly, art, furniture, and many more. Would you like to start 3D printing yourself? Visit open fablabs like Protospace or i-Fbrica (in the Netherlands). If you would like to have your digital model 3D printed by a thirt party upload your model on one of these websites: 3D Hubs, Shapeways or Materialise. Your 3D printed object will be shipped right to your home!There is plenty of information on 3D printing to find on the internet. An example of an easy to read overview on 3D printing can be found here. But the best way to learn more is of course to visit the expo centre!
Do you wish to book a personal tour?
The 3D Print Canal House offers personal group and even individual tours around the building site for those interested in getting to know all the inside information about the project.
What do you see?
-3D printing on a small and a large scale (a look inside the Kamermaker and how it works!)
-Materials and samples
-Research results, models and drawings
-The House under construction!
-How it all started
plus a chance to talk to DUS architects and ask questions.
Duration: 30-40 minutes
Language: Dutch or English
Costs: €100 ex VAT(€121) per group of 15 people, €150 ex VAT (€181) per group of 25 people.
Please contact firstname.lastname@example.org for bookings.
Do you want to visit the 3D Print Canal House with your company?
DUS architects is happy to welcome you and engage in a dialogue about the project. Please contact info@3dprintcanalhouse to arrange a special group visit for a personal tour, lecture or custom made program.
Do you want to know more about 3D printing and its uses for the building industry?
DUS architects hosts special lectures and 3D printing demonstrations for:
-Primary school students (minimum age 10)
-High school students
-University and higher education.
What do you see?
-Personal and interactive tour of the building site, including a look inside the Kamermaker, the house and the expo, including Q&A.
-3D printing demo: step by step explanation of the process from idea to 3D printed product.
-Optional: lecture by DUS architects.
Each programme is tailor made to suit the interests and level of the students.
Duration: 1 to 2 hours (length of programme depending on how in depth you would like to go).
Language: Dutch or English
Costs: €200 ex VAT (€242) per group of 15 people for a tour + demo. €350 ex VAT (€423,50) per group of 15 people for a lecture + demo.
Larger groups are possible too. Please contact email@example.com to arrange a custom-fit educational visit.
If your organisation would like to publish something about the 3D Print Canalhouse, we can provide you a neat press kit. Please request the password by sending a mail to info[at]3dprintcanalhouse.com
Fill in your password:
To get access to the audio tour, you need to visit the 3D Print Canalhouse construction site and acquire a password.
Fill in your password:
Like many things we own or use everyday, sensors are found everywhere. Placing small sensors within the print material could enable us to print a house that could relay data about weather, light, and temperature. This information could be used to alter and update resources used by the house in real time.
The 3D Print Canal House opened its building site and expo centre to the public!
This summer, we are open six days a week!
Tuesday till Sunday from 11 am until 5 pm.
Entrance fee: €2,50 - includes an informative audiotour that you can easily download on your smart phone (bring your headphones!).
Address: Badhuiskade 11, 1031 KV in Amsterdam North.
Walking distance from Amsterdam Central Station (take the short ferry ride to Buiksloterweg), directly behind the Shell tower and A-Lab. Parking is possible at the adjacent parking place of the EYE Film Institute.
If you wish to book a group visit, personal tour or lecture, or are curious to hear about other things the 3D Print Canal House can offer you, please contact firstname.lastname@example.org.
The expo centre is an ideal location for a special event and can be rented upon request.
For more information on prices and availability please send an email via: email@example.com
The KamerMaker is moved to the construction site of the 3D Print Canal House! Now It won't be long before we can 3D print on site!
The start of a test print with a new hotmelt from Henkel.
The canal house design continues to evolve and our tests continue to grow as we break the 2.5m barrier!
Snapshot movie of last Saturday’s 3D-print-test researching new material settings and constructive ornament ideas.
Partner DOEN visited the KamerMaker. We had a nice analogue presentation and discussion about the effects and future possibilities of 3D printing.
Today the KamerMaker is one of the Amsterdam locations for the international press visit in the context of the Coronation fever. Crews from Russia, Japan, Costa Rica, Germany, Norway and many others where interested to see the innovative side of Amsterdam.
Today we celebrated the launch of the building of the Worlds’ first 3D-printed Canal House. Amsterdam deputy mayor Carolien Gehrels, Amsterdam Smart City partners, the Amsterdam Economic Board, the Dutch Building Industries and DUS architects with the KamerMaker team signed a letter of intent and secure the start of the first building phase in 2013. It starts today!
Adding virtual layers to our canal house! We had a very nice meeting with augmented reality artist Sander Veenhof, testing the merging of 3D printing and augmented reality. The result was shown live at Vodafone Firestarters http://www.facebook.com/FirestartersNL?fref=ts
The KamerMaker has been printing during the recent snow period! Stichting DOEN also gave us a visit to talk about what the KamerMaker will do in the upcoming year. We gave them a little demonstration.
almost the end of 2012... here's a sneak peek of our future plans... what if we could 3D Print a house, room by room, with the KamerMaker?
The KamerMaker has been open for almost 4 weeks now and we wanted to give you a update on the printing research and development.
We are currently test printing with an extruder which Joris created especially for the KamerMaker. The design for the extruder is based on an Ultimaker, however it accepts 3 filaments of plastic rather than one. The extruder was assembled from 3d printed parts (which were printed on an Ultimaker) and laser cut wood pieces. The output of the extruder is not enough for XXL prints (2m x 2m x 3.5m) but so far it has worked for XL prints (.5m x .5m x 2m).
2. Test Prints
Last Friday, we planned on printing a 1.5m tall column over the course of one day, however the weather did not cooperate with us, so we had to start our print in the afternoon and continue into the evening. Even though we didn’t achieve the height we wanted, it was a great opportunity to see what the KamerMaker looks like at night.
Since the opening we have been receiving a steady stream of visitors at the KamerMaker. The visitors have ranged from designers/design students who would like to print an object to local residents who are curious about the project. Many people have asked when and how they can print their own design on the KamerMaker, however we are not ready for that at this time. The plan is that over the next few months we will continue to test different extruders and really perfect the technique. After we have successfully printed several pieces and feel the print quality is up to par, then we will open up the KamerMaker to other designers. Until then, everyone is welcome to stop by the KamerMaker to follow the live testing and experimenting.
The KamerMaker is officially up and running! On Sunday we celebrated the opening of the world’s largest portable 3d printer in the front garden of our office. We had great weather for the opening and there was a large and diverse turnout. Thanks again to Carolien Gehrels, Deputy Mayor of Amsterdam for helping us officially open the KamerMaker.
We have to thank all the collaborators for their hard and dedication to the project. Thanks again to the Open Coop, Ultimaker Ltd, Rooie Joris, Fablab Protospace, Fiction Factory, Faberdashery, Xtrution, Almond Techniek, Tentech, Stamhuis Techniek, Amsterdam Energie and other volunteer enthusiasts which helped make the KamerMaker opening such a success.
And here is a video of the opening which was shot by Siert Wijnia from Ultimaker:
We would like to invite EVERYONE to the official opening of the KamerMaker on September 16th in front garden of our office in Amsterdam. Feel free to stop by to see the KamerMaker in action. Stay tuned for more details…
We have been working with Joris at Protospace to develop a new high powered Ultimaker extruder which uses 3 plastic filaments at one once instead of one. This is still a rough prototype, but we have got some nice results from it. One of the most exciting opportunities is that we can begin to easily mix colors in our prints. We attached the extruder to the CNC milling machine at Protospace to do some full scale testing. Thanks to Joris for his hard work on this and we look forward to testing it on the KamerMaker and also thanks toProtospace for letting us use their space for testing.
It’s been a while since a posted an update on the KamerMaker, but that is because we have been so busy getting ready for the official opening on September 16th. For the past couple of weeks we have been preparing the garden space in front of our office for the delivery of the shipping container next week! Today the concrete pads were delivered which will be used as the base for the shipping container. Fiction Factory is finishing up installing the facade, and next week the XYZ gantry will be installed at Fiction Factory.
The KamerMaker is really starting to take shape at Fiction Factory, because last week the stainless steel panels arrived and the installation has begun. We are hoping that the facade will be installed by the end of this week. Unfortunately, everyone will have to wait until September for the big reveal of the mirror facade, which is when we will take off the protective plastic. Thanks again to Fiction Factory for their hard work on the project. Next step is printing all the wind mills for the facade!
We would like to share the final design for the facade of the KamerMaker which is currently being fabricated. As we mentioned earlier, we are using a shipping container as the main frame for the KamerMaker, and will be tilting it up vertically rather than horizontally, so that we will be able to print rooms that are 3 meters tall! The container will be clad with perforated stainless steel panels, which will have 3d printed objects inserted into the perforations. As we mentioned in a previous post, we will be hosting the the next Ultimaker meetup on July 16th at the Open Coop in Amsterdam, where we will begin printing wind turbines for the facade. So, for those who may be interested in Ultimaker, own an Ultimaker, or is interested in the KamerMaker are invited to this event and help us print our facade.
Despite the unforgiving weather yesterday, we had a great turnout for the Ultimaker meetup at our office. There was a very energetic and collaborative atmosphere where attendees helped us 3d print wind turbines for the facade, offered their advice about the wind turbine design, and engaged in some nice discussions about the design of the KamerMaker. Thanks for everyone who attended and we look forward to continuing to be engaged in this collaborative community.
We would like to invite you to an fun event next weekend (Sunday, June 17th) that we will be taking part in. The event will be hosted by the Tolhuistuin and will celebrate the opening of the new garden space in front of the Open Coop. DUS will participating in a birdhouse building workshop where kids will be able to design and 3D print their own birdhouse! Our 3D printing workshop will be taking place on the site where the KamerMaker will be installed next month. So, if you are interested in attending the event, you can find our more information here: http://www.tolhuistuin.nl/new-agenda/opening-schommeltuin/
This week we attended the Netherlands Ultimaker meetup at Protospace in Utrecht. Every six weeks, Ultimaker users meet at different locations to discuss new developments, test new machines, troubleshoot problems, and present ideas related to Ulimaker. We attended this meetup to present the KamerMaker to the community and present our idea for the next meetup.
Our idea is to host the next Ultimaker meetup at the Open Coop in Amsterdam, and have the attendees help us print pieces for the facade of the KamerMaker. The facade for the KamerMaker will be made out of perforated stainless steel where we will insert 3d printed pieces into the perforations. We would like to print small wind turbines which can generate enough energy to power an LED. We are currently testing different designs and will publish those soon. So, the next meetup will be on July 16th at the Open Coop in Amsterdam where the KamerMaker will be. So, we would like to open up an invitation to anyone who may be interested in Ultimaker, owns an Ultimaker, or is interested in the KamerMaker to attend the event and help us print our facade. The idea is that people will bring their Ultimakers to the Open Coop, DUS will provide designs to printed and print material (3mm filament). Keep following the blog for more information and details about this event.
Is the KamerMaker a utopic dream? Well, last week we participated in a discussion with several other architects/theorists where we discussed that question along with various other topics related to utopian architecture. The discussion, named Failed Architecture, was part of ongoing series of lectures at TrouwAmsterdam. It was great for us think about the KamerMaker within this context and project its implications to architecture and construction. We look forward to continuing this discussion with the public when the KamerMaker is up and running!
We recently purchased a shipping container which will be used as the main frame for the KamerMaker. It is currently at Fiction Factory where they first dismantled it and are now rebuilding it. However, for the KamerMaker we would like to use the container frame in a unconventional manner by tilting it up vertically rather than horizontally, so that we will be able to print rooms that are 3 meters tall! Today was a big day for us because the container was flipped up vertically for the first time. It was great to see the new frame and understand how big our prints are going to be!
We recently visited an extruder manufacturer to continue our research into how extruders work and how to create one. We tested several different sizes and types of extruders to see which one would fit our application.
We created our first full scale full print! We have been working at Protospace for the past month to create and test a full scale plastic extruder. Last week we finally got the extruder up and working , so we atttached it to the CNC milling machine to see what it could make. Even though it works, this is just the beginning and we have many more tests to perform.
At our last design meeting we discussed our updated facade design with Fiction Factory and how we can develop a plastic extruder with Joris from EPMD.
Look at the shipment that we received last week…this container will be the base for the KamerMaker!
We recently had a meeting at our office with Ultimaker and Joris from EPMD to discuss the overall schedule of the project, extrusion technique, and the XYZ framework of the printer. We had some good discussions and everyone is really excited to see the KamerMaker working soon
We would like thank everyone who came by on Saturday to visit the launch party! It was great to talk and share our ideas about the project with experts and non-experts in 3D printing. We received nice feedback from many of the visitors which we hope to apply to the project.
Today, we are putting the finishing touches on a scale model of the KamerMaker for the Object Rotterdam exhibit. Here are is sneak peek of the model…
Here is our animation of the KamerMaker in action!
The 3D Printing already is going very well.. but building goes better with help from a lot of frie
The 3D Printing already is going very well.. but building goes better with help from a lot of friends! You can become a friend by liking us on Facebook, by visiting (all entrance tickets are donated to the project) or by becoming a Special Friend:
Special Friends provide vital funding to the project. Here’s everything you get as a Special friend:
Choose the one for you:
Like us on Facebook and drop by for €2.50
Great for the interested person who visits regularly
Ideal if you like to bring someone along
gives access up to 2 adults and 5 children (up to 12)
Receive invitations for two to private views and lectures
Receive invitations for two to private views and lectures and get a unique signed 3D printed house scale 1:100
Contact firstname.lastname@example.org mentioning the type of friend you would like to become, and your:
Company (if the case)
We’re looking forward to welcome you as a special friend at the 3D Print Canal House!
The Student Hotel Amsterdam
During his visit to the Rijksmuseum in Amsterdam, The 3D Print Canal House was presented to United
During his visit to the Rijksmuseum in Amsterdam, The 3D Print Canal House was presented to United States’ President Barack Obama by the Mayor of Amsterdam Eberhard van der Laan. In addition to the historical Nightwatch, the visit also focused on new innovations in Amsterdam. The 3D Print Canal House researches how 3D printing techniques can offer solutions to housing questions worldwide.
President Obama visited the Rijksmuseum together with Dutch Prime Minister Rutte, Mayor of Amsterdam Eberhard van de Laan and director of the Rijksmuseum Wim Pijbes. Immediately next to the historical Nightwatch a piece of the future of Amsterdam was presented: the World’s first 3D printed canal house. Mayor van der Laan showed several scale models of the 3D Print Canal House as well as a 1:1 print at the full size of 1.5 by 2 by 2.5 meters.
The 3D Print Canal House is a unique research project because it combines history and future: a canal house is 3D-printed in full size with the KamerMaker, a large moveable 3D-printer that was developed specially for this project. This building project addresses the question of how digital production techniques can offer affordable housing solutions worldwide, for example in slums or in disaster areas, as well as looking at how digital designs can be shared and modified via the internet and new online networks. The 3D Print Canal House is printed with newly developed materials derived from biobased raw materials. It is also possible to print with recycled plastics.
photo credits: Dave de Vaal
More and more sectors see the potential of 3D printing techniques as a means to develop new housing
More and more sectors see the potential of 3D printing techniques as a means to develop new housing solutions. Unique about the 3D Print Canal House project is that all these sectors are now collaborating in one project.
Premium partners invest in the project with knowledge and means:
Henkel will innovate by developing a new sustainable 3D print material for the building industries.
Heijmans will research what new construction techniques are needed for 3D printing buildings.
The Municipality of Amsterdam investigates the effect of the digital maker-industries on regulations and opportunities for employment, and Amsterdam Smart City partners bring knowledge to connect the print process to smart-grid development.
DOEN Foundation and The Amsterdam Art Fund support the expo-terrain because it links design, culture and technique and thereby instigates innovation.
DUS architects is initiator and designer of the 3D Print Canal House and the KamerMaker, the large portable 3D Printer.
All partners show courage, because we do not exactly know yet how the project will end, we are learning by doing and sharing!
AMSTERDAM FONDS VOOR DE KUNST
GEMEENTE AMSTERDAM / EZ
AMSTERDAM SMART CITY
BREEDBAND NEDERLAND / AALDERING ICT
Telephone: +31 (0)20 789 03 59
Telephone: +31 (0)20 789 03 59
Address: Badhuiskade 11, 1031 CL Amsterdam
Facebook: 3D Print Canal House
Twitter & Instagram: #3DPRINTCH
3D-print building techniques make architecture personal again. Just imagine… It won’t be long
3D-print building techniques make architecture personal again. Just imagine… It won’t be long before you can online select your favorite room designs made by your favourite architects, and customize them to your personal taste. You add personal data, such as size limits and location, and the rooms are then digitally connected and merged into your ideal house. You can 3D print scale models of the house, and when you’re totally content with the design, contact a contractor with a KamerMaker, and place the order. This bridges the gap between designer, client and builder and makes architecure truly architecture personal.
Digital prodcution of architecture is an excellent tool when complex and tailormade architecture is required. New custom-made interiors for excisting buildings for instance. Just imagine you 3D scan an building structure. then digitally design a bathroom that exactly suits the space, which is then 3D printed and inserted on site in a day. No labourous timberwork on site, no mess.. a perfect match!